TM 5-3805-290-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0012 00
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
N OT E
Review all WARNINGs, CAUTIONs, and NOTEs
before performing PMCS on the 924G Wheel
Loader.
Perform all weekly and before operation PMCS
checks if:
a.
You are the assigned operator but have not oper-
ated the loader since the last weekly checks.
b.
You are operating the loader for the first time.
Unless otherwise indicated, perform all preventive
maintenance and lubrication with machine parked
on level ground, work tool lowered to ground, park-
ing brake lever engaged, transmission in N (NEU-
TRAL), and engine shut down.
LEFT SIDE
a. Check on ground under machine for Class III oil or coolant leaks
Before
1
Overall View
evidence of fluid leakage such as oil, are evident. Any fuel leakage
001200
coolant, or fuel.
is evident.
b.Check machine for obvious damage Damage that would impair
that would impair operation.
operation is evident.
Multi-Purpose a. Check for missing mounting bolts at Bolts are loose or missing.
2
Before
cutting edges and teeth. Ensure cut- Any teeth are missing.
(MP) Bucket
ting edges and teeth are not cracked
(If Equipped)
or missing.
b.Check for cracked welds.
Cracked welds are evident.
a. Check for cracked, bent, or other- Cracks or damage that would
3
Before
Forklift Pallet
wise damaged forks and fork frame. impair operation is evident.
Forks (If
Equipped)
b.Ensure protective caps are installed Protective caps are missing.
on two quick disconnected fittings.
