TM 5-3805-290-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0012 00
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
ITEM
MAN-
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
WAR N I N G
76
Monthly
Service Brake
(Con't)
Holding Abil-
Use of seat belt while operating machine is mandatory.
ity Test
Fasten belt BEFORE operating machine. Trying to fas-
ten belt during operation creates a hazardous condition.
Failure to follow this warning may result in injury or
death to personnel in the vent of an accident or machine
overturn.
(4) Fasten seat belt before testing
brakes (WP 0004 00).
b.Start engine (WP 0005 00). Raise
work tool slightly (WP 0004 00).
c. Apply service brakes and disengage
parking brake (WP 0004 00).
d.Press top of transmission neutralizer
switch (WP 0004 00).
e. Place autoshift control switch in
MANUAL mode (WP 0004 00).
Move shift lever to 3rd speed F
(FORWARD) (WP 0004 00).
f. Gradually increase engine speed to Machine moves.
high idle (2,450 rpm). Machine
should not move.
g.Reduce engine speed to low idle
(825 rpm). Move shift lever to N
(NEUTRAL) (WP 0004 00).
h.Lower work tool to ground (WP
i. Engage parking brake (WP 0004
j. If machine moved during test, notify Machine moves.
Unit Maintenance. Have parking
brakes inspected and repaired, if
necessary, before returning machine
to service.
0012 00-64
