TM 5-3805-290-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0012 00
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
g.Start engine (WP 0005 00). Raise
78
Monthly
0.3 Hour
Drive Shaft
bucket off ground (WP 0004 00).
(Con't)
Spline (Center)
h. Disengage parking brake and articu-
late machine until it is straight (WP
i. Lower bucket to ground and apply
slight downward pressure (WP 0004
j. Engage parking brake (WP 0004
Ensure all decals and data plates are
79
Monthly
Decals and
present and legible (WP 0007 00).
Data Plates
CAU T I ON
80
Monthly
All Systems -
Machine Exer-
DO NOT perform this PMCS exercise when temperature
cise
is below 0F (-18C). Failure to do so may result in dam-
age to equipment.
N OT E
DO NOT exercise machine if it has been operated within
the past month.
a. Perform Before operation PMCS.
b.Start and warm up engine (WP 0005
c. While machine is warming up, per- Class III oil or coolant leaks
form a walkaround inspection, are evident. Any fuel leaks
checking for evidence of leaks.
are evident.
N OT E
If temperature is below 32F (0C), operate controls
prior to moving machine.
d.When machine has warmed up,
begin to operate ALL controls
slowly (WP 0004 00):
(1) Transmission in all ranges
including reverse.
(2) Service brakes applied and
released.
(3) Parking brake engaged and
disengaged.
0012 00-68