TM 5-3805-290-10
CONFIGURE MACHINE FOR TRANSPORT - CONTINUED
0028 00
ROPS/FOPS REMOVAL - CONTINUED
0028 00
o.
Install nylon strap on handrail to help ground
personnel guide ROPS/FOPS during removal.
427-B1183
WARN I N G
During removal procedure, DO NOT walk or stand under cab. Failure to follow this warning may
result in injury or death to personnel.
C AU T I O N
Slowly raise ROPS/FOPS approximately 1 in. (25.4 mm) until it is clear of operator platform. Verify
that all mechanical and electrical connections are disconnected. Use nylon strap to guide ROPS/FOPS
during removal process.
N OT E
Ensure cab doors are closed.
p.
Slowly raise ROPS/FOPS until clear of operator station.
q.
Lower ROPS/FOPS and place on shipping pallet.
r.
Remove guide pins.
s.
Reinstall 14 ROPS/FOPS mounting bolts on chassis for transport (DO NOT tighten).
2.
Place exhaust stack on same shipping pallet as ROPS/FOPS.
3.
Secure ROPS/FOPS and exhaust stack to shipping pallet with tiedowns.
0028 00-10
