TM 5-3805-290-23-2
ENGINE REPLACEMENT - CONTINUED
0145 00
REMOVAL - CONTINUED
6.
Remove bolt (15), washer (16), and AC accumulator bracket (17) from tower bracket (14).
427-B2019
7.
Remove two bolts (18) and washers (19) from each
side of tower bracket (14). Remove tower bracket
from machine.
8.
If equipped with arctic heater, cut tiedown straps from
arctic heater wiring harness and remove completely
from tower bracket (14).
427-B2021
9.
Remove two bolts (20) and washers (21) from accumulator mounting bracket (22) and position accumulator mounting
bracket and ether starting aid (23) aside.
10.
Disconnect line (24) from ether starting aid (23).
11.
Remove three bolts (25) and washers (26) and position two brackets (27) aside.
12.
Remove two bolts (28) and washers (29) from filter mounting bracket (30) and position filter assembly (31) aside.
13.
Remove four bolts (32), washers (33), and tower bracket (34) from machine.
0145 00-4
