TM 5-3805-290-23-2
RADIATOR AND FAN GROUP REPLACEMENT - CONTINUED
0168 00
INSTALLATION - CONTINUED
32.
Feed compressor hose (1) through opening in fan
group (2).
33.
Install two new O-rings (3) and connect two hose
assemblies (1) to fan group (2).
427-B0060
34.
Install spacer (9), three clamps (8), washers (7), and bolts (6) on three hose assemblies (1 and 4).
35.
Connect fuel lines to fuel tank (WP 0035 00).
CAU T I ON
DO NOT run engine until all fluids have been replenished. Failure to comply may result in damage to
equipment.
36.
Connect battery cables (WP 0079 00).
37.
Charge air conditioner with refrigerant (WP 0191 00).
38.
Fill hydraulic tank (WP 0140 00).
39.
Fill cooling system (WP 0042 00).
40.
Install air cleaner (WP 0032 00).
41.
Install hood (WP 0110 00).
42.
Install rear lamp housings (WP 0058 00).
43.
Run engine until normal operating temperature is reached (TM 5-3805-290-10).
44.
Check for correct operation of machine (TM 5-3805-290-10).
45.
Shut down engine (TM 5-3805-290-10).
46.
Check for leaks.
END OF WORK PACKAGE
0168 00-25/(0168 00-26 Blank)