TM 5-3805-290-23-2
SEPARATE LOADER FRAME AND REAR FRAME
(ARTICULATION PIVOT PINS REPLACEMENT) - CONTINUED
0183 00
CONNECTION - CONTINUED
13.
Install 0.06 in. (1.5 mm) of shims (75) on lower hitch
(70).
427-B0475
14.
Install upper cap (63), lower cap (64), three washers
(62), and bolts (61) on machine.
15.
Use drive plate with nut and bolt to check rolling
16.
Add or remove shims (75) until rolling torque of each
bearing is between 15 lb-in. and 50 lb-in. (1.7 Nm and
5.6 Nm).
427-B0476
17.
Install remaining three washers (62) and bolts (61) on
upper cap (63).
427-B0467
0183 00-17
