TM 5-3805-290-23-2
SEPARATE LOADER FRAME AND REAR FRAME
(ARTICULATION PIVOT PINS REPLACEMENT) - CONTINUED
0183 00
CONNECTION - CONTINUED
31.
Install upper cap (54), lower cap (55), three washers
(53), and bolts (52) on machine.
32.
Use drive plate with nut and bolt to check rolling
33.
Add or remove shims (58) until rolling torque of each
bearing is between 25 lb-in. and 99 lb-in. (2.8 Nm and
11.2 Nm).
427-B0480
34.
Install remaining three washers (53) and bolts (52) on
upper cap (54).
427-B0463
0183 00-20