TM 5-3805-290-23-2
SEPARATE LOADER FRAME AND REAR FRAME
(ARTICULATION PIVOT PINS REPLACEMENT) - CONTINUED
0183 00
CONNECTION - CONTINUED
44.
Install six washers (43) and bolts (42) on pin (44).
427-B0486
45.
Measure gap between bottom of pin (44) and bottom
of hitch. Record measurement for future use.
427-B0487
46.
Install shims (32) with thickness that is 0.01 in. (0.25
mm) less than measured gap from step 44.
47.
Install plate (31), four washers (30), and bolts (29) on
machine.
48.
Reposition hose assembly and install clip (28).
427-B0450
0183 00-24