TM 5-3805-291-10
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS - CONTINUED
0004 00
TRANSMISSION CONTROL
0004 00
Direction Selection
N OT E
Backup alarm sounds when in reverse.
Direction is determined by position of lever that is located on left side of steering column or by remote forward/neutral/
reverse (F/N/R) switch that is located next to bucket controls.
Forward (1). Push lever forward to place transmis-
1.
sion in FORWARD.
2.
Neutral (2). Place lever in middle position to place
transmission in NEUTRAL.
3.
Reverse (3). Pull lever rearward to place transmission
in REVERSE.
427-C0026
Remote F/N/R Switch
Once machine is started, NEUTRAL lamp should be
on. Machine may be placed into gear either by using shifter
or remote F/N/R switch. In order to use shifter, ensure that
remote F/N/R switch is in NEUTRAL position. Use shifter
to select direction. The appropriate direction indicator
should illuminate.
In order to use remote F/N/R switch, place shifter in
NEUTRAL position. Select direction that is desired by using
remote F/N/R switch. The appropriate direction indicator
should illuminate.
Transmission will be placed in NEUTRAL position if
both shifter and remote F/N/R switch indicate a state that is
not NEUTRAL during operation. NEUTRAL lamp will be
OFF. Both shifter and remote F/N/R switch must be placed
in NEUTRAL position before normal operation can resume.
427-C0027
Speed (Gear) Selection
a.
To manually shift transmission, autoshift switch (see callout 24 on page 0004 00-4) must be in MANUAL posi-
tion.