TM 5-3805-291-10
HIGHWAY TRANSPORT - CONTINUED
0019 00
INTRODUCTION - CONTINUED
WARN I N G
Stand clear of frame articulation area when machine is operating. There is no clearance for personnel in
this area when machine turns. Crushing could occur, resulting in injury or death to personnel.
6.
Throughout procedure, be aware of potential hazards from frame articulation area. Stand clear of frame articulation area
when machine is operating.
WAR N I N G
BE ALERT for personnel in the area while operating machine. Always check to ensure area is clear of
personnel and obstructions before moving. Failure to follow this warning may result in injury or death to
personnel or damage to equipment.
7.
Ground guide assistance is MANDATORY when driving machine on or off trailer.
CONFIGURE MACHINE FOR HIGHWAY TRANSPORT
0019 00
Refer to WP 0024 00.
0019 00
LOADING MACHINE ON TRAILER
1.
Chock wheels of trailer.
WAR N I N G
Backup alarm does not work with ROPS/FOPS removed. Failure to follow this warning may result in
injury or death to personnel.
2.
Turn battery disconnect switch to ON position (WP 0004 00).
3.
Remove tarp and plugs.
4.
Turn engine start switch to ON position and leave it there for 30 seconds.
5.
Turn engine start switch to OFF position and leave it there for 30 seconds.
6.
Turn engine start switch to ON position and leave it there for 30 seconds.
WARN I N G
Stand clear of frame articulation area when machine is operating. There is no clearance for personnel in
this area when machine turns. Crushing could occur, resulting in injury or death to personnel.
7.
Start loader engine and allow to warm up (WP 0005 00).
8.
Raise loader arm as required so that loader arm will clear crest of trailer ramp (WP 0004 00).
0019 00-2