TM 5-3805-291-10
CONFIGURE MACHINE FOR TRANSPORT - CONTINUED
0024 00
ROPS/FOPS REMOVAL - CONTINUED
0024 00
WARN I N G
DO NOT remove exhaust stack until it has cooled to the touch. Wear gloves and protective clothing to
guard against burns. Failure to follow this warning may result in injury to personnel.
N OT E
ROPS/FOPS weighs 1,000 lb (454 kg).
9.
Attach lifting device to four lift points (A) on ROPS/
FOPS roof brackets.
427-C1975
10.
Close cab door securely.
11.
Slide deadbolt latch upward on left-side cab door to separate upper and lower door sections.
CAU T I ON
Ensure ROPS/FOPS is lifted straight up until fully clear of operator station. Failure to do so could result in
damage to operator station and operator components.
12.
Slowly raise top portion of ROPS/FOPS cab approximately 1 in. (25.4 mm) until clear of operator station.
13.
Ensure all mechanical and electrical connections are disconnected. Remove top portion of ROPS/FOPS cab.
14.
Lower top portion of ROPS/FOPS cab on shipping pallet.
0024 00-4
