TM 5-3805-291-23-2
POWERTRAIN ELECTRONIC CONTROL MODULE (ECM) REPLACEMENT - CONTINUED
0063 00
REMOVE ECM - CONTINUED
10.
Remove and discard tiedown strap (12) from wiring harness (13).
11.
Disconnect wiring harness (13) from ECM (14).
12.
Remove four bolts (15), washers (16), spacers (17), rear washers (18), and ground strap (19) from ECM (14).
13.
Remove ECM (14) from machine.
14.
Remove eight mounts (20) from ECM (14).
427-C0337
INSTALL ECM
1.
Install eight mounts (20) on ECM (14).
2.
Position ECM (14) on machine.
3.
Install ground strap (19), four rear washers (18), ECM (14), spacers (17), washers (16), and bolts (15) on machine.
4.
Connect wiring harness (13) to ECM (14).
5.
Position cover assembly (5) on machine.
6.
Install screw (11) on cover assembly (5).
7.
Attach new tiedown strap (12) to wiring harness (13).
8.
Install filter (10) on cover assembly (5).
9.
Position air filter cover (9) on cover assembly (5).
10.
Tighten two thumbwheel screws (8) on air filter cover (9).
0063 00-7