TM 5-3805-291-23-2
SERVICE LIGHTS AND FRONT TURNLAMP REPLACEMENT - CONTINUED
0071 00
SERVICE LIGHT, HOUSING ASSEMBLY, AND WIRING HARNESS REMOVAL
Remove service light from housing. Refer to Service
1.
Light Removal in this work package.
Remove turnlamp from housing. Refer to Turnlamp
2.
Removal in this work package.
Remove blackout drive light (WP 0068 00).
3.
Disconnect wiring harness (26) from connector (27).
4.
5.
Remove four bolts (28) and washers (29) from hous-
ing (4).
Remove housing (4) from machine.
6.
7.
Remove wiring harness (26) from housing (4).
427-C1260
SERVICE LIGHT, HOUSING ASSEMBLY, AND WIRING HARNESS INSTALLATION
1.
Install wiring harness (26) in housing (4).
Install housing (4) on machine.
2.
Install four bolts (28) and washers (29) on housing (4).
3.
Connect wiring harness (26) to connector (27).
4.
Install blackout drive light (WP 0068 00).
5.
Install turnlamp. Refer to Turnlamp Installation in this work package.
6.
Install service light in housing. Refer to Service Light Removal in this work package.
7.
8.
Verify correct operation of service light (TM 5-3805-291-10).
END OF WORK PACKAGE
0071 00-12