TM 5-3805-291-23-2
CAMSHAFT SPEED/TIMING SENSOR (SECONDARY) REPLACEMENT - CONTINUED
0076 00
INSTALLATION
1.
Lubricate new O-ring (7) with a thin coat of clean oil. Install new O-ring on camshaft speed/timing sensor (6) then place
in position.
2.
Install washer (5) and bolt (4) in camshaft speed/timing sensor (6). Tighten bolt to 21 5 lb-ft (28 7 Nm).
3.
Connect wiring harness (2) to camshaft speed/timing sensor connector (3).
4.
Install three new tiedown straps (1) around wiring harness (2).
5.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
6.
Shut down engine (TM 5-3805-291-10).
7.
Check for oil leaks.
8.
Close hood (TM 5-3805-291-10).
END OF WORK PACKAGE
0076 00-3/(0076 00-4 Blank)
