TM 5-3805-291-23-2
FRONT AND REAR AXLE OIL TEMPERATURE SENSORS REPLACEMENT - CONTINUED
0081 00
N OT E
The procedure for replacing the rear axle oil temperature is the same as for the front.
REMOVAL
1.
Remove two bolts (1) and shield (2).
2.
Disconnect wiring harness connector (3) from temperature sensor (4).
3.
Remove temperature sensor (4) and O-ring (5) from machine. Discard O-ring.
427-C0275
INSTALLATION
1.
Lubricate new O-ring (5) with a thin coat of clean oil. Install new O-ring and temperature sensor (4) on machine.
2.
Connect wiring harness connector (3) to temperature sensor (4).
3.
Install shield (2) and two bolts (1).
4.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
5.
Shut down engine (TM 5-3805-291-10).
6.
Check for leaks.
END OF WORK PACKAGE
0081 00-2