TM 5-3805-291-23-2
ENGINE OIL PRESSURE SENSOR REPLACEMENT - CONTINUED
0079 00
REMOVAL
1.
Remove and discard tiedown strap (1) from clamp (2).
2.
Remove wiring harness clamp (3) from wiring harness
(4).
3.
Disconnect oil pressure sensor wiring harness connec-
tor (5) from oil pressure sensor wiring harness (6).
4.
Remove engine oil pressure switch (7) and O-ring (8)
from engine. Discard O-ring.
INSTALLATION
1.
Lubricate new O-ring (8) with a thin coat of clean oil. Install O-ring and engine oil pressure switch (7) on engine.
2.
Connect oil pressure sensor wiring harness connector (5) to oil pressure sensor wiring harness (6).
3.
Install wiring harness clamp (3) on wiring harness (4).
4.
Install new tiedown strap (1) on clamp (2).
5.
Check oil level (TM 5-3805-291-10).
6.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
7.
Shut down engine (TM 5-3805-291-10).
8.
Check for oil leaks.
9.
Close hood (TM 5-3805-291-10).
END OF WORK PACKAGE
0079 00-2