TM 5-3805-291-23-2
TRANSMISSION OUTPUT SPEED SENSOR REPLACEMENT - CONTINUED
0093 00
REMOVAL
N OT E
Perform steps 1 thru 4 to remove each of two transmission output speed sensors from transmission.
1.
At top front of transmission, remove bolt (1),
washer (2), and clip (3) from transmission housing (4).
2.
Remove output speed sensor connector (5) from
clip (3).
3.
Disconnect output speed sensor connector (5) from
wiring harness (6).
4.
Remove transmission output speed sensor (7) and
seal (8) from transmission housing (4). Discard seal.
INSTALLATION
N OT E
Perform steps 1 thru 4 to install each of two transmission output speed sensors in transmission.
1.
Lubricate new seal (8) with a thin coat of clean oil. Install new seal on transmission output speed sensor (7).
2.
Install transmission output speed sensor (7) in transmission housing (4).
3.
Connect wiring harness (6) to output speed sensor connector (5).
4.
Install output speed sensor connector (5) in clip (3).
5.
Install clip (3), washer (2), and bolt (1) on transmission housing (4).
0093 00-2