TM 5-3805-291-23-2
TORQUE CONVERTER OUTPUT SPEED SENSOR REPLACEMENT - CONTINUED
0091 00
ADJUSTMENT
1.
Loosen nut (12) and remove torque converter output speed sensor (10) from transmission flange (4).
2.
Align gear tooth (13) directly in center of threaded
sensor opening (14).
3.
Screw torque converter output speed sensor (10) into
A
hole until end of sensor contacts gear tooth (13).
4.
Turn torque converter output speed sensor (10) coun-
terclockwise 1/2 turn. This will set air gap (A) to
0.028 in. (0.71 mm).
5.
Tighten nut (12).
6.
Install left side cover (WP 0135 00).
427-C0413
7.
Close hood (TM 5-3805-291-10).
8.
Drive machine to verify correct operation (TM 5-3805-291-10).
END OF WORK PACKAGE
0091 00-3/(0091 00-4 Blank)
