TM 5-3805-291-23-2
SECONDARY STEERING VALVE REPLACEMENT - CONTINUED
0126 00
INSTALLATION
N OT E
Apply a thin coat of clean oil to all O-rings before installation.
1.
Install two pressure switches (1) on secondary steering valve (16).
2.
Install new O-ring (17) and fitting (7) on secondary steering valve (16).
3.
Position secondary steering valve (16) on machine and install three washers (15) and bolts (14).
4.
Install two new gaskets (12) and position two hose assemblies (13) and install four flange halves (11), eight washers
(10), and bolts (9) on hose assemblies.
5.
Install new O-ring (8) and connect hose assembly (6) to fitting (7).
6.
Position pressure switches (1) and install two clips (5), washer (4), and bolt (3).
7.
Connect two pressure switches (1) to chassis wiring harness (2).
8.
Install cab (WP 0132 00).
9.
Verify proper operation of secondary steering (TM 5-3805-291-10).
END OF WORK PACKAGE
0126 00-3/(0126 00-4 Blank)