TM 5-3805-291-23-2
STEERING CONTROL VALVE MAINTENANCE - CONTINUED
0127 00
CAU T I ON
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug
openings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
REMOVAL
1.
Disconnect three hoses (1) and remove O-rings (2)
from fittings (3). Discard O-rings.
2.
Remove three fittings (3) and O-rings (4) from
steering control valve assembly (5). Discard O-rings.
0127 00-2