4
TM 5-3805-291-23-2
STEERING METERING PUMP REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Unit
Rag, wiping (Item 35, WP 0233 00)
Tools and Special Tools
Tag, marker (Item 43, WP 0233 00)
Tool kit, general mechanic's, automotive (Item 90,
O-ring (10)
Shop equipment, automotive maintenance and
Personnel Required
repair: organizational maintenance, common no.
MOS 62B, Construction Equipment Repairer
1 (Item 70, WP 0232 00)
Quick disconnect tool - 06 (Item 58, WP 0232 00)
Equipment Conditions
Quick disconnect tool - 08 (Item 59, WP 0232 00)
Steering frame lock connected (TM 5-3805-291-
10)
Materials/Parts
Cap set, protective (Item 6, WP 0233 00)
Hydraulic system pressure relieved (TM 5-3805-
291-10)
Cleaning compound, solvent, type III (Item 7, WP
Front guard on cab removed (WP 0133 00)
Oil, lubricating, OE/HDO-5/40 (Item 27, WP 0233
Drawings Required
00)
Oil, lubricating, OE/HDO-15/40 (Item 28, WP
TM 5-3805-291-23P, Figures 111 and 114
Estimated Time to Complete Task
Oil, lubricating, OEA-30, Arctic (Item 29, WP
2.5 hr
WARN I N G
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate the skin, causing injury to personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to follow this warning may result in injury to personnel.
Hydraulic oil used in the performance of maintenance can be very slippery. Immediately wipe up any
spills. Failure to follow this warning may result in injury to personnel.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug
openings after removing lines. Contamination of system could result in premature failure.