TM 5-3805-291-23-2
SIDE COVERS AND HOOD REPLACEMENT - CONTINUED
0135 00
INSTALLATION - CONTINUED
7.
Close hood (TM 5-3805-291-10).
8.
Open rear door (TM 5-3805-291-10).
9.
Install bracket (5) with camera (4) on hood (9) with four washers (7) and new locknuts (6).
10.
Install cable (3) on hood (9) with seven clamps (8), washers (2), and bolts (1).
11.
Connect cable (3) to camera (4).
12.
Close rear door (TM 5-3805-291-10).
WAR N I N G
Before operating the machine, secure the steering frame lock in the stowed position. DO NOT operate
machine with steering frame lock connected. Failure to lock steering frame lock into the stowed position
before operating can result in loss of steering and injury or death to personnel.
13.
Secure steering frame lock in stowed position (TM 5-3805-291-10).
14.
Open and close hood to verify correct operation of hood and camera (TM 5-3805-291-10).
END OF WORK PACKAGE
0135 00-8