TM 5-3805-291-23-2
REAR WINDSHIELD WIPER AND MOTOR REPLACEMENT - CONTINUED
0146 00
INSTALLATION
CAU T I ON
DO NOT operate wiper motor before wiper arm assembly is installed.
New wiper motor is preset in parked position. If wiper motor is operated before installation of the
wiper arm assembly, misalignment will occur. This can cause damage to wiper motor, wiper arm
assembly, and/or window.
DO NOT manually rotate wiper arm assembly on shaft.
1.
Install blade (14) on wiper arm (8) with washer (15), nut (16), and bolt (17).
2.
Support wiper motor assembly (5) inside cab.
3.
Install wiper motor assembly (5), new gasket (13), plate (12), bolt (10), and retaining nut (11) on machine. Tighten
retaining nut to 14 1 lb-ft (19 1 Nm).
4.
Connect wiring harness assembly (4) to wiper motor assembly (5).
5.
Install cover (9) on machine.
0146 00-5
