TM 5-3805-291-23-2
QUICK COUPLER REPLACEMENT - CONTINUED
0169 00
INSTALLATION - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Tilt link weighs approximately 140 lb (64 kg).
7.
Use lifting equipment to lower tilt link (7) into position.
8.
Install pin assembly (11) and secure with spacer (10), washer (9), and bolt (8).
9.
Install two new O-rings (6) and connect lines (2) to
quick coupler (5).
10.
Install clamp (4) and bolt (3) on two lines (2).
11.
Install new tiedown strap (1) on two lines (2).
427-C1274-1
WAR N I N G
Before operating the machine, secure the steering frame lock in the stowed position. DO NOT operate
machine with steering frame lock connected. Failure to lock steering frame lock into the stowed position
before operating can result in loss of steering and injury or death to personnel.
12.
Secure steering frame lock in stowed position (TM 5-3805-291-10).
END OF WORK PACKAGE
0169 00-5/(0169 00-6 Blank)