TM 5-3805-291-23-2
BUCKET TIPS AND CUTTING EDGES REPLACEMENT - CONTINUED
0170 00
BUCKET TIPS INSTALLATION - CONTINUED
2.
Install new bucket tip (1) on adapter (10).
427-C1217
N OT E
The bucket tip can be rotated by 180 degrees to allow more or less penetration.
To correctly install the pin into the retainer, the pin must be driven in from the right side of the tooth.
Improper installation of the pin can result in the loss of the bucket tip.
3.
Insert pin (4) through bucket tip (1).
4.
Place punch over bucket tip (1) and locate pin (4) in
hole.
5.
Strike punch with a hammer at back to start pin (4).
6.
Strike punch until pin (4) is fully inserted in bucket
(5).
7.
After pin (4) is set, make sure retainer (8) fits snugly
in pin groove.
427-C1214
0170 00-5
