TM 5-3805-291-23-2
FRONT MAIN SEAL REPLACEMENT - CONTINUED
0174 00
INSTALLATION
N OT E
Leave the shipping sleeve in place when installing front main seal. The front main seal must be installed
dry.
1.
Position new front main seal (3) on crankshaft (4).
2.
Push front main seal (3) into place. This will dislodge
shipping sleeve.
3.
Install five washers (2) and nuts (1) on front main seal
(3). Tighten nuts in numerical sequence as shown.
427-C0554
4.
Install crankshaft vibration damper (WP 0173 00).
5.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
6.
Shut down engine (TM 5-3805-291-10).
7.
Check for leaks.
END OF WORK PACKAGE
0174 00-3/(0174 00-4 Blank)