4
TM 5-3805-291-23-2
FUEL TRANSFER PUMP REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Tag, marker (Item 43, WP 0233 00)
Direct Support
O-ring (5)
Tools and Special Tools
Personnel Required
Tool kit, general mechanic's, automotive (Item 90,
MOS 62B, Construction Equipment Repairer
Shop equipment, automotive maintenance and
References
repair: field maintenance, basic, less power (Item
TM 5-3805-291-10
68, WP 0232 00)
Equipment Conditions
Materials/Parts
Side cover removed (WP 0135 00)
Cap set, protective (Item 6, WP 0233 00)
Drawings Required
Cleaning compound, solvent, type III (Item 7, WP
TM 5-3805-291-23P, Figure 25
Fuel, turbine, aviation (Item 12, WP 0233 00)
Estimated Time to Complete Task
Rag, wiping (Item 35, WP 0233 00)
2.0 hr
WARN I N G
DO NOT perform fuel system checks, inspections, or maintenance while smoking or near fire, flames,
or sparks. Fuel may ignite, causing injury or death to personnel or damage to equipment.
Fuel used in the performance of maintenance can be very slippery. Immediately wipe up any spills.
Failure to follow this warning may result in injury to personnel.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug
openings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
