TM 5-3805-291-23-2
ACCESSORY SUPPORT BRACKETS REPLACEMENT - CONTINUED
0194 00
REMOVAL - CONTINUED
WARN I N G
Use extreme caution when handling
heavy parts. Provide adequate support
and use assistance during procedure.
Failure to follow this warning may
result in injury to personnel.
N OT E
Side bracket weighs 23 lb (10 kg).
Accessory mechanism weighs 45 lb
(20 kg).
3.
Remove four bolts (9), washers (10), and bracket (6)
from engine.
4.
Remove two nuts (11) and washers (12) from
accessory mechanism (13).
5.
Remove two bolts (14) and washers (15) from
427-C1902
accessory mechanism (13).
6.
Remove accessory mechanism (13) from engine.
CLEANING AND INSPECTION
WARN I N G
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low-toxic
material. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in
well-ventilated areas. Keep away from open flames and other sources of ignition. Failure to do so may
result in injury or death to personnel.
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure
when drying parts with compressed air. DO NOT direct compressed air against human skin. Failure to
follow this warning may result in injury to personnel. Make sure air stream is directed away from user
and other personnel in the area. To prevent injury, user must wear protective goggles or face shield.
1.
Clean all parts and surfaces with solvent cleaning compound.
2.
Dry parts with compressed air.
3.
Inspect all parts for damage, wear, pitting, cracks or corrosion and replace if necessary.
0194 00-2
