TM 5-3805-291-23-2
ENGINE WIRING HARNESS REPLACEMENT - CONTINUED
0196 00
REMOVAL
WARN I N G
Ensure battery cables are disconnected before performing this task. Failure to follow this warning may
result in injury to personnel or damage to equipment.
N OT E
Note location of all tiedown straps and fasteners to ensure correct installation.
Tag wires prior to removal to ensure correct installation.
Some nuts, bolts, and components in illustrations removed for clarity.
1.
Remove and discard tiedown straps (1) from engine wiring harness (2).
2.
Disconnect engine wiring harness (2) from crankshaft position sensor lead (3).
3.
Disconnect engine wiring harness (2) from camshaft position sensor lead (4).
4.
Disconnect engine wiring harness (2) from coolant temperature sensor (5).
5.
Disconnect engine wiring harness (2) from atmospheric air sensor lead (6).
6.
Disconnect engine wiring harness (2) from alternator (7).
7.
Disconnect engine wiring harness (2) from fuel pump (8).
8.
Disconnect engine wiring harness (2) from fuel pump pressure sensor lead (9).
9.
Disconnect engine wiring harness (2) from fuel pump temperature sensor (10).
10.
Disconnect engine wiring harness (2) from fuel pump differential pressure switch lead (11).
11.
Disconnect engine wiring harness (2) from intake air pressure sensor lead (12).
12.
Disconnect engine wiring harness (2) from intake air temperature sensor (13).
13.
Disconnect engine wiring harness (2) from engine oil pressure sensor lead (14).
0196 00-2
