TM 5-3805-291-23-2
FRONT AXLE REPLACEMENT - CONTINUED
0207 00
INSTALLATION - CONTINUED
6.
Slide front drive shaft (10) into yoke (14).
7.
Install two straps (13) on yoke (14).
8.
Install four washers (12) and bolts (11) on straps (13). Tighten bolts to 125 11 lb-ft (170 15 Nm).
9.
Remove support from front drive shaft (10).
10.
Connect wiring harness (8) to sensor (9).
11.
Lubricate and install new O-ring (6) on hose (5).
12.
Connect hose (5) to fitting (7).
427-C1035
13.
Place guard (4) in position on machine.
14.
Install two washers (3) and bolts (2) on guard (4).
427-C1034
0207 00-7
