TM 5-3805-291-23-2
FRONT AXLE REPLACEMENT - CONTINUED
0207 00
INSTALLATION
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Axle weighs approximately 3,395 lb (1,540 kg).
1.
With assistance, attach lifting equipment to each side
of axle (15), as shown.
427-C1036
2.
Use lifting equipment to raise axle (15) to machine.
3.
Install eight washers (20) and bolts (19) on axle (15). Tighten bolts to 1,328 148 lb-ft (1,800 200 Nm).
4.
Place covers (18) in position on each side of machine.
5.
Install two washers (17) and bolts (16) on each cover
(18).
427-C1037
0207 00-6