TM 5-3805-291-23-2
REAR AXLE REPLACEMENT - CONTINUED
0208 00
INSTALLATION - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in
injury or death to personnel.
N OT E
Oscillating axle weighs 3,600 lb (1,635 kg).
Apply a thin coat of clean oil to all O-rings before installation.
2.
Fasten lifting equipment to each side of oscillating
axle (3) and position axle on machine.
427-C0511
3.
With assistance, install two washers (18) and nuts (17)
in front axle support (12) and machine frame. Tighten
nuts to 740 90 lb-ft (1,000 125 Nm).
4.
Repeat step 3 for other side.
427-C0513
0208 00-7