TM 5-3805-291-23-2
SEPARATE FRONT LOADER FRAME AND REAR FRAME - CONTINUED
0211 00
CONNECTION - CONTINUED
50.
Position steering cylinder (5) on frame (4).
51.
Install pin assembly (3), washer (2), and bolt (1) on
frame (4). Repeat for remaining steering cylinder.
427-C1004
52.
Connect hydraulic hose assemblies to front frame (WP 0156 00).
53.
Install center drive shaft (WP 0107 00).
54.
Install cab (WP 0132 00).
55.
Fill hydraulic tank (WP 0148 00).
56.
Connect front wiring harness to chassis wiring harness (WP 0197 00).
57.
Start machine (TM 5-3805-291-10).
58.
Run engine until operating temperature is reached and verify correct operation of machine (TM 5-3805-291-10).
59.
Shut down engine (TM 5-3805-291-10).
60.
Check for leaks.
END OF WORK PACKAGE
0211 00-18
