TM 5-3805-291-23-2
EVAPORATOR CORE REPLACEMENT - CONTINUED
0227 00
REMOVAL - CONTINUED
N OT E
Tag hoses and wiring harnesses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
Refrigerant is odorless. As a result, all of it may leak away and not be noticed until system stops cool-
ing. All vehicle refrigerant systems lose some refrigerant depending on the condition of system. Higher
loss rates signal a need to locate and repair leaks.
Leaks are most often found at the compressor hose connections and at various fittings and joints in sys-
tem. If unapproved replacement hoses are installed, refrigerant can be lost through hose permeation.
1.
Disconnect wiring harness (1) from wiring harness
(2).
427-C1177
2.
Loosen two clamps (3) and disconnect two coolant
hoses (4) from heater core (5).
3.
Remove bolt (6), washer (7), and spacer (8) from clip
(9).
427-C1178
0227 00-2
