TM 5-3805-291-23-2
BUCKET TILT LEVER AND LINK REPLACEMENT - CONTINUED
0228 00
REMOVAL - CONTINUED
0228 00
Tilt Link - Continued
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Bucket tilt link weighs 140 lb (64
kg).
Note direction of tilt link to aid in
installation.
6.
Use lifting equipment to remove bucket tilt link (1)
from machine.
7.
Remove lip seal (10) from each side of bucket tilt link
(1). Repeat this step for opposite end of bucket tilt
link. Discard four lip seals.
427-C1127
N OT E
Items 10, 36, 46, 52, 57, and 82 (WP
0232 00) are assembled to make puller
assembly as shown.
8.
Using puller assembly, remove bearing (11) from
bucket tilt link (1). Repeat this step for opposite end of
bucket tilt link.
427-C1128
0228 00-4
