TM 5-3805-291-23-2
BUCKET TILT LEVER AND LINK REPLACEMENT - CONTINUED
0228 00
REMOVAL - CONTINUED
Tilt Lever - Continued
0228 00
N OT E
Items 36, 43, 52, 57, 82, and 94 (WP
0232 00) are assembled to make puller
assembly as shown.
3.
Use lifting equipment to support rod end of tilt cylin-
der (16).
4.
With assistance, install puller assembly on tilt cylinder
(16) to remove pin assembly (15).
5.
Start engine and retract tilt cylinder (16). Lower rod
end of tilt cylinder onto lift arm assembly.
427-C1131
6.
Place pin assembly (15) through pin bore of tilt lever (17).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Tilt lever weighs 840 lb (380 kg).
Tooling weighs 75 lb (34 kg).
7.
Use lifting equipment to support tilt lever (17).
427-C1132
0228 00-6
