TM 5-3805-292-10
0005
OPERATING MACHINE CONTINUED
Changing Direction and Engine Speed
0005
1. When changing directions, it is best to reduce engine speed.
2. Keep a loaded bucket close to the ground.
3. Stop machine, if necessary, to recover from an unstable condition.
4. To change speed:
a. Throttle lever (Figure 2, Item 2) is for setting engine speed. Increase engine speed by pushing forward on
throttle lever. Lower engine speed by pulling back in throttle lever. Engine speed is constant at throttle lever
setting.
b. Throttle pedal (Figure 2, Item 1) is for momentary increase in engine speed. When pedal is released,
engine speed defaults to throttle lever setting.
1
2
458-0107-1
Figure 2. Throttle Lever and Throttle Pedal.
0005
END OF TASK
