TM 5-3805-292-10
0026
UNLOADING MACHINE FROM FLATCAR (LIFTING MACHINE) CONTINUED
Figure 6. Shipping Data Plate (M400W).
0026
WARNING
DO NOT allow personnel on machine while lifting.
Remove attachments before lifting.
Ensure loader lift arms are completely lowered.
Use extreme caution when handling heavy loads.
Always use properly rated lifting device.
Keep clear of machine supported by lifting device.
Be alert for personnel in the area while operating machine. Always check to ensure area is
clear of personnel and obstructions before moving.
Failure to follow these warnings may result in injury or death to personnel or damage to
equipment.
4. Lift machine off flatcar and lower to a flat surface.
5. Disconnect lifting device and sling from machine.
6. Notify Field Maintenance to connect battery cables.
7. Carry out all PMCS checks before using machine (WP 0020).
8. Start engine and allow to warm up (WP 0005).
END OF TASK