TM 5-3805-292-23
0063
REMOVAL
00063
N OT E
Tag lines and fittings to aid in installation.
Cap lines, fittings, and hoses.
1. Disconnect hose (Figure 1, Item 1) from fitting (Figure 1, Item 5).
2. Remove fitting (Figure 1, Item 5) from machine.
3. Disconnect electrical connector (Figure 1, Item 4).
4. Disconnect upper tube assembly (Figure 1, Item 9) from fitting (Figure 1, Item 12).
5. Disconnect lower tube assembly (Figure 1, Item 10) from fitting (Figure 1, Item 11).
6. Remove upper fitting (Figure 1, Item 12) from machine.
7. Remove lower fitting (Figure 1, Item 11) from machine.
8. Remove two hoses (Figure 1, Item 13) from tube assemblies (Figure 1, Item 9 and 10). Remove and discard
two O-rings (Figure 1, Item 14).
9. Remove two bolts (Figure 1, Item 6), washers (Figure 1, Item 7), locknuts (Figure 1, Item 16), isolation block
(Figure 1, Item 17), and two clamps (Figure 1, Item 15) from bracket (Figure 1, Item 8). Discard locknuts.
10. Remove two bolts (Figure 1, Item 2), washers (Figure 1, Item 3), and tube assemblies (Figure 1, Items 9 and
10) from bracket (Figure 1, Item 8) and remove bracket from machine.
0063-2