TM 5-3805-292-23
0110
INSTALLATION
000110
1. Attach lifting device to ROPS (Figure 2, Item 1).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting equipment used is in good condition
and of suitable load capacity. Keep clear of heavy parts supported only by lifting
equipment. Failure to follow this warning may result in injury or death to personnel.
2. Use lifting device to install ROPS (Figure 2, Item 1) on machine.
3. Install ROPS pin (Figure 2, Item 3), two washers (Figure 2, Item 4), and pins (Figure 2, Item 2) on ROPS (Fig-
ure 2, Item 1).
4. Remove lifting device from ROPS (Figure 2, Item 1).
Figure 2. ROPS.
0110
END OF TASK
