TM 5-3805-292-23
0164
INSTALLATION
000164
1. Install front lens (Figure 2, Item 7) and two screws (Figure 2, Item 6) on work light (Figure 2, Item 1).
2. Install side lens (Figure 2, Item 10) and three screws (Figure 2, Item 8) on work light (Figure 2, Item 1).
N OT E
Nozzle is installed on RH worklight only.
3. Install U-nut (Figure 2, Item 9) and nozzle (Figure 2, Item 5) on work light (Figure 2, Item 1).
N OT E
Perform step 4 for RH work light only.
4. Connect windshield washer tube (Figure 2, Item 4) to work light (Figure 2, Item 1).
5. Install two bulbs (Figure 2, Item 3) on work light (Figure 2, Item 1).
N OT E
Install electrical connectors as tagged during removal.
6. Connect two bulbs (Figure 2, Item 3) to wiring harness (Figure 2, Item 2).
7. Install work light (Figure 1, Item 3), three washers (Figure 1, Item 2), and screws (Figure 1, Item 1) on
machine.
END OF TASK
FOLLOW-ON TASKS
000164
1. Connect battery power (WP 0142).
2. Verify correct operation of machine (TM 5-3805-292-10).
END OF TASK
END OF WORK PACKAGE
0164-3/(4 blank)