TM 5-3805-298-23-1
0015
Table 1. E0172 High Air Filter Restriction Event Code.
0015
EID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
E0172 High Air Filter
Conditions Which Generate This
Restriction Event Code
Code:
This code is generated only when the
engine has been running for 3 minutes,
and restricted airflow has been
detected. This code will be reset when
the ignition switch is turned to the OFF
position.
System Response:
E0172-1: A warning will appear on
instrument panel; event code will be
logged if air filter restriction is detected
for 15 seconds.
E0172-2: A warning will appear on
instrument panel; event code will be
logged if air filter restriction is detected
for 30 seconds.
Possible Performance Effect:
Engine power will be derated.
Test Step 1. Check for Active
Diagnostic Codes.
1. Connect MSD (WP 0008) and
select Transmission 924H.
2. Start and run engine (TM 5-3805-
298-10) for at least 3 minutes.
3. Using MSD, check for active
Diagnostic Codes Are Not Active -
diagnostic codes (WP 0008).
Proceed to Test Step 2.
Diagnostic Codes Are Active - Refer
to (WP 0005) and repair active
diagnostic codes first.
