TM 5-3805-298-23-1
0026
Table 1. E0539 High Intake Manifold Temperature Event Code - Continued.
026
EID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Inspect Aftercooler for
E0539 High Intake Manifold
Damage, Dirt, and Debris.
Temperature Event Code -
Continued
WARNING
Allow engine to cool off before performing maintenance on air cleaner.
Hot metal parts can cause severe burns. Wear eye, hand, and skin
protection when working with heated parts.
Failure to follow this warning may result in severe burns to personnel.
CAUTION
Keep all parts clean from contaminants.
Failure to follow this caution may result in damage to equipment.
1. Turn ignition switch and battery
disconnect switch to the OFF
position (TM 5-3805-298-10).
2. Inspect the aftercooler (Figure 1,
Aftercooler OK - Proceed to Test
Item 1) and cooling fins (Figure 1,
Step 3.
Item 2) for bends, damage, dirt,
Aftercooler or Cooling Fins Bent or
and debris.
Damaged - Straighten cooling fins, or
replace aftercooler (WP 0207).
Proceed to Test Step 7.
Aftercooler Blocked With Dirt or
Debris - Clean or remove dirt and
debris.
Proceed to Test Step 7.
0026-4
