TM 5-3805-298-23-1
0044
Table 1. 3 Fuel Injector 3 Diagnostic Codes - Continued.
044
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
6. Using digital multimeter
Resistance 5.0 Ohms or Less -
3-5 Fuel Injector 3 Current
Replace fuel injector 3 (WP 0198).
(WP 0174), measure resistance
Below Normal - Continued
between wires 1 and 2 (WP 0012,
Remove jumper wire from terminal 3
Figure 4).
and terminal 4 of connector EG-C1
(WP 0012, Figure 5).
Proceed to Test Step 5.
Resistance Greater Than 5.0 Ohms -
Replace injector cylinder 3 and 4 jumper
harness (WP 0213).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Ensure valve cover (WP 0187) is
installed on engine.
3. Start engine or attempt to start
Diagnostic Code 3-5 Fuel Injector 3
engine (TM 5-3805-298-10). Using
Current Below Normal Becomes
Inactive - Troubleshooting complete.
MSD, check for active diagnostic
codes (WP 0008).
Diagnostic Code 3-5 Fuel Injector 3
Current Below Normal Remains
Active - Repeat troubleshooting from
the beginning.
0044-7
