TM 5-3805-298-23-1
0051
Table 1. 110 Engine Coolant Temperature Sensor Diagnostic Codes - Continued.
051
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
110-4 Engine Coolant
Test Step 2. Test for Shorted Engine
Temperature Sensor Signal
Coolant Temperature Sensor.
Voltage Is Below Normal or
the Voltage Is Shorted Low -
Continued
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Disconnect connector E-C3
(WP 0012, Figure 16) from engine
coolant temperature sensor.
3. Turn battery disconnect switch ON
(TM 5-3805-298-10).
4. On MSD, select C6.6 924 and
110-4 Engine Coolant Temperature
check for active diagnostic codes
Sensor Signal Voltage Is Below
Normal Remains Active - Proceed to
Test Step 3.
110-4 Engine Coolant Temperature
Sensor Signal Voltage Is Below
Normal Becomes Inactive - Replace
engine coolant temperature sensor
(WP 0248).
Proceed to Test Step 4.
Test Step 3. Test for Shorted Engine
Control Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove right engine access panel
(WP 0348).
3. Disconnect connector E-C4
(WP 0012, Figure 10) from engine
ECM connector J2.
4. Using digital multimeter
Continuity - Replace engine control
(WP 0174), test for continuity
wiring harness (WP 0294).
between connector E-C4
Proceed to Test Step 4.
(WP 0012, Figure 10) terminal 43
No Continuity - Proceed to step 5.
and terminal 37.
5. Using digital multimeter
Continuity - Replace engine control
(WP 0174), test for continuity
wiring harness (WP 0294).
between connector E-C4
Proceed to Test Step 4.
(WP 0012, Figure 10) terminal 43
No Continuity - Replace engine ECM
and ground.
(WP 0265).
Proceed to Test Step 4.
0051-5
