TM 5-3805-298-23-1
0068
Table 1. 2417 Start Aid Diagnostic Codes - Continued.
068
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 3. Test Rear Frame Wiring
2417-5 Ether Control
Harness for High Resistance or
Solenoid Current Below
Open.
Normal - Continued
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove right lower cab access
panels (WP 0347).
3. Disconnect connector EN-C21
(WP 0012, Figure 39) from
connector M-C22 (WP 0012,
Figure 40).
4. Using digital multimeter
Resistance 5.0 Ohms or Less -
(WP 0174), measure resistance
Replace engine wiring harness
between connector M-C22
(WP 0299).
(WP 0012, Figure 40) terminal 1
Proceed to Test Step 4.
and terminal 2.
Resistance Greater Than 5.0 Ohms -
Replace rear frame wiring harness
(WP 0295).
Proceed to Test Step 4.
0068-10
