TM 5-3805-298-23-1
0068
Table 1. 2417 Start Aid Diagnostic Codes - Continued.
068
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Faulty Start Aid
2417-5 Ether Control
Solenoid.
Solenoid Current Below
Normal - Continued
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Disconnect connector M-C20
(WP 0012, Figure 41) from start
aid solenoid.
3. Connect jumper wire between
terminal 1 and terminal 2 of
connector M-C20 (WP 0012,
Figure 41).
4. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10). Using MSD,
select C6.6 924 (WP 0008).
5. At MSD, select Diagnostics
(Figure 3, Item 1) and Diagnostic
Tests (Figure 3, Item 2).
6. In the new screen, select Override
Parameters (Figure 3, Item 3).
0068-6
