TM 5-3805-298-23-1
0068
Table 1. 2417 Start Aid Diagnostic Codes - Continued.
068
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
6. Select Ether Injection (Figure 8,
2417-6 Ether Control
Item 1).
Solenoid Current Above
Normal - Continued
7. From the pop-up window
(Figure 8, Item 3), select the down
arrow (Figure 8, Item 4).
8. Select ON (Figure 8, Item 5) from
the drop down menu and select
OK (Figure 8, Item 6).
9. Select YES from pop-up window to
activate ether valve.
10. Using the MSD (WP 0008), check
Diagnostic Code 2417-5 Ether
for active diagnostic codes
Control Solenoid Current Below
Normal Becomes Active - Select the
(Figure 8, Item 8).
Disable Override button (Figure 8,
Item 7) to de-activate ether valve.
Select the Disconnect icon (Figure 8,
Item 2).
Turn ignition switch and battery
disconnect switch to the OFF position
(TM 5-3805-298-10).
Replace ether valve (WP 0224).
Proceed to Test Step 3.
Diagnostic Code 2417-6 Ether
Control Solenoid Current Above
Normal Is Active - Select the Disable
Override button (Figure 8, Item 7) to
de-activate ether valve.
Select the Disconnect icon (Figure 8,
Item 2).
Proceed to Test Step 2.
0068-16
