TM 5-3805-298-23-1
0068
Table 1. 2417 Start Aid Diagnostic Codes - Continued.
068
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
6. Select Ether Injection (Figure 10,
2417-6 Ether Control
Item 1).
Solenoid Current Above
Normal - Continued
7. From the pop-up window
(Figure 10, Item 3), select the
down arrow (Figure 10, Item 4).
8. Select ON (Figure 10, Item 5) from
the drop down menu and select
OK (Figure 10, Item 6).
9. Select YES from pop-up window to
activate ether valve.
10. Using the MSD (WP 0008), check
Diagnostic Code 2417-5 Ether
for active diagnostic codes
Control Solenoid Current Below
Normal Becomes Active - Select the
(Figure 10, Item 8).
Disable Override button (Figure 10,
Item 7) to de-activate ether valve.
Select the Disconnect icon (Figure 10,
Item 2).
Turn ignition switch and battery
disconnect switch to the OFF position
(TM 5-3805-298-10).
Replace ether valve (WP 0224).
Proceed to Test Step 4.
Diagnostic Code 2417-6 Ether
Control Solenoid Current Above
Normal Is Active - Select the Disable
Override button (Figure 10, Item 7) to
de-activate ether valve.
Select the Disconnect icon (Figure 10,
Item 2).
Proceed to Test Step 3.
0068-20
